Stainless Steel Water Jets Hose Nozzle
-
Payment
-
Origin
China Mainland
-
Minimum Order
5
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
IPX5 IPX6 Stainless Steel Water Jets Hose Nozzle
Introduction:
Test Set consists of a jet handle that is equipped with a pressure gauge and an easy-to-adjust flow valve. The interchangeable nozzles assemble easily to the jet handle.
Standard:
According to IEC60529: Degrees of protection provided by enclosures(IP Code X5 and X6)
Figure 6 – Test device to verify protection against water jets (hose nozzle)
Specifications:
• Internal diameter of the nozzle:6.3mm
• Delivery rate:12.5/min+/- 5%
• Water pressure: to be adjusted to achieve the specified delivery rate
• Core of the substantial stream: circle of approximately 40mm diameter at 2.5 distance from nozzle
• Test duration per square meter of enclosure surface area likely to be sprayed :1mm
• Minimum test duration :3min
• Distance from nozzle to enclosure surface:between2.5 and 3m
Pressure Gauge | 0 - 1.6 bar |
Nozzle Diameter | 6.3mm(IPX5) ; 12.5mm(IPX6) |
Material | Stainless steel nozzle |
Reference standards | IEC60529 IPX5 IPX6, IEC60598-1 IEC 60335-1,IEC60745-1 |
FAQ
1.Who do you serve?
The markets we serve include: information technology, medical, RF/wireless, telecommunications, industrial, consumer and manufacturing, universities, academies and institutes. Our products are popular all over the world. Our customers are from USA, Russia, Japan, Indonesia, Brazil, South Africa, Korea, Malaysia, Australia , UK, Italy, etc.
2.What’s your quality control system?
We have perfect products quality control system
Pre-production quality control. Row materials is provided by quality suppliers and some of parts are imported from Germany, USA and Japan, which ensure the good quality at the source. Meanwhile, we will test the materials and parts before mass production.
Mid-production quality control. Our QC team will work through the whole production process.
Acceptance test. Each instruments must be carried out 100% quality examination before the shipment.
3.Do you own any factories?
Bonad owns its factories and provides with all kinds of OEM/ODM services.
4.Do you have any suggestions on payment?
Yes. To save the bank charge, we suggest to pay via PayPal for small amount and T/T for large sums.
5.Can I get a certificate of calibration(CNAS)?
Yes. But it’s for an extra charge.
- IEC61032 Test Rod Probe 32 5 Pieces / (Min. Order)
- IP4X 1.0mm Test Wire Probe D 5 Pieces / (Min. Order)
- Laboratory Blast Oven Chamber 5 Pieces / (Min. Order)
- Sun Exposure Accelerated Aging Test Euipment 5 Pieces / (Min. Order)
- Low Air Pressure Environmental Test Chamber 5 Pieces / (Min. Order)
- Building Material Non-combustibility Tester 5 Pieces / (Min. Order)
- Single Cable Vertical Burning Test Equipment 5 Pieces / (Min. Order)
- Proof and Comparative Tracking Index Tester 5 Pieces / (Min. Order)
- Needle Flame Testing Equipment 5 Pieces / (Min. Order)
- Glow Wire Test Apparatus 5 Pieces / (Min. Order)