Proof and Comparative Tracking Index Tester

Product Detail

Proof And Comparative Tracking Index Tester

(Model# BND-LD)




Introduction:

Tracking Index Text Apparatus BND-LD creates moist conditions by providing drops between electrodes to measure the electrical breakdown(tracking) properties of an insulating material .

Tracking is an electrical breakdown on the surface of an insulating material. A large voltage difference gradually creates a conductive leakage path across the surface of the material by forming a carbonized track.

The Comparative Tracking Index or CTI is used to measure the electrical breakdown (tracking) properties of an insulating material.

To measure the tracking, 50 drops of 0.1% ammonium chloride solution are dropped on the material, and the voltage measured for a 3 mm thickness is considered representative of the material performance. Also term PTI (Proof Tracking Index) is used: it means voltage at which during testing on five samples the samples pass the test with no failures.

 

Standard: 

IEC 60112:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials

 

Application: 

Comparative Tracking Index Tester is widely used for electrical safety assessment of electrical apparatus. This machine mainly tests the resistance tacking performance of  solid insulating materials, which may be exposed to moisture and dirty environment.




Features: 

automation control systems; digital display.




Instruction:The Proof And Comparative Tracking Index Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. Inside the well lit cabinet, a test specimen is placed on a glass plate and two platinum electrodes are lowered onto the top surface. A gauge block is supplied with the instrument to ensure the electrodes have the proper distance between them. The table height is easily adjustable to ensure the proper angle of the electrodes and height of drops. The rest of the test is controlled from outside the test chamber with the door closed. The voltage, limiting current, drip rate and number of drips are all set on the control panel. An operator should observe the test to see if a flame ignites. The instrument sounds an alarm if there is a tracking failure of at least two seconds.    




parameter

the electrode material	rectangular electrode - platinum metal
the electrode pressure	1.0 ± 0.05N
the distance between   electrodes	4.0mm ± 0.01mm, angle 60 °± 5
the electrode voltage	100 ~ 600V (48 ~ 60HZ) adjustable short-circuit current 1.0 ± 0.1A, voltage drop is less than 10%
drops of liquid height	30 ~ 40mm adjustable
the size of the drops	44 to 55 drops / 1cm3 Adjustable
drops Time	30s ± 5s,
the number of drops	0 to 9999 times   adjustable
the leakage judge	loop current greater than 0.5A and maintain the 2 seconds the relay to cut off the current, indicating that the sample failed
the test process	automatic control of test procedures, independent ventilation
reference standards	IEC60112 ,IEC60745, IEC60335-1, IEC60598-1
the studio volume	0.5 cubic
outer dimensions	1000mm wide x 650mm deep x 1300mm high




Product Show






FAQ

1.What’s the payment term?
T/T, Western Union, Money gram ,PayPal ,etc .




2.What’s the shipping way?
Via air , sea or express like DHL, UPC, TNT, FedEx and so on.



3.What’s your after-sales service policy?
One year warranty and life long tech support.




4.Can I book a factory tour?

Yes. Please contact us to arrange it.




5.What’s your working hours?

8:30~12:00  13:30~18:00 (from Monday to Friday)